YG1 07584-045R 3/8″ Size, 1″ LOC, 0.045″ Radius, 4 Flute, Solid Carbide Finishing End Mill Luxury

Applications

This YG1 E5216 solid carbide finishing end mill features four flutes and a slow 30° helix angle, optimizing core strength for steady, controlled cuts in aluminum, brass, bronze, copper, plastics, and other materials suited to low-to-moderate speed machining. Its 0.045″ corner radius resists tip chipping during interrupted cuts, extending tool life in finishing passes. The bright finish coating provides a sharp, polished cutting edge preferred for these softer, non-ferrous materials. The 3/8″ fractional size with a 1″ length of cut and 2-1/2″ overall length balances reach and rigidity. Center cutting geometry allows plunge and ramping operations, expanding versatility in complex profiles. Operators should select this end mill when demanding smooth surface finishes and dimensional accuracy in non-ferrous or polymer workpieces are required, relying on the slow helix and polished edge to maintain consistent chip evacuation and minimize built-up edge formation.

Features

• Possible for high-speed cutting, suitable for high efficiency maching for hardened & high alloy steels, steel casting, chill casting, malleable cast iron, CrNi-steels, brass, copper, aluminum with a high percentage of silicon and abrasive plastics.