YG1 85595TH 5/8″ Size, 3/4″ LOC, 5 Flute, Hardslick Solid Carbide Finishing End Mill Top Rated

Applications

The YG1 85595TH solid carbide finishing end mill, with a 5/8″ diameter and 3/4″ length of cut, offers a stub-length design that provides rigidity and precise control. Its 1.2 length-to-diameter ratio and 5-flute layout support finishing operations requiring tight tolerances and smooth surface finishes in stainless steel and heat-resistant superalloys. Equipped with a 45° helix angle and Hardslick coating, this end mill excels in chip evacuation and wear resistance, reducing built-up edge and enhancing surface finish quality on difficult-to-machine materials. The center-cutting geometry enables plunge cutting, expanding its operational versatility. Users should avoid applying this tool on steel (ISO P) and non-ferrous metals due to coating unsuitability that can cause premature wear. The lack of a corner radius means that edge chipping prevention depends on the coating and flute design, making it less suitable for interrupted cuts where corner protection is essential.

Features

• Designed to machining stainless steel, inconels and other alloys.
• The new design of stub length allows cutting at maximum speeds and feeds with minimum deflection.
• 5 Flute and 45 degree medium helix allow harmonic balance and smooth cutting.